<div><div>dcbel Inc. (www.dcbel.energy) is a growing company developing technology and designing products that will make clean, efficient, and sustainable energy accessible to all — because everyone in the world deserves energy without compromise. dcbel at the leading edge of the residential energy revolution, enabling decentralized energy consumption and production through its vertically integrated suite of energy hardware and software products, and their supporting infrastructure. Our flagship product, the dcbel Home Energy Station, is a small wall mounted device that gives everyone ownership over their energy supply by using solar power to charge their EV and home, unlocking their EV’s battery for backup power (V2H), and optimizing the energy flow between their solar panels, EVs, backup battery and the grid. The opportunitydcbel is looking to hire a Manufacturing Engineer that will be responsible for the industrialization, optimization, and continuous improvement of products and manufacturing processes. The ideal candidate is a hands-on individual contributor with at least 5 years of manufacturing experience, who thrives in a dynamic environment and is willing to get directly involved to drive results. Main responsibilities<ul><li>Lead New Product Introduction (NPI) ramp-up and training at contract manufacturer sites. Maintain issue logs and track issues to resolution. </li><li>Populate ERP, MRP, and PLM systems with accurate production data. </li><li>Own part quality, process optimization, and supplier industrialization throughout the product lifecycle. </li><li>Monitor production throughput and quality metrics; recommend and implement corrective actions as needed. </li><li>Develop, map, and optimize manufacturing process flows, takt times. </li><li>Collaborate with suppliers to ensure alignment with dcbel’s quality and manufacturing standards. </li><li>Develop and maintain comprehensive documentation, including work instructions and standard operating procedures. </li><li>Ensure robust error-proofing (poka-yoke) is built into manufacturing processes. </li><li>Lead and close NCRs (Non-Conformance Reports) and SCARs (Supplier Corrective Action Requests) efficiently, preventing recurring issues. </li><li>Drive continuous improvement initiatives targeting cost reduction, waste elimination, lead-time improvements, and quality enhancement. </li><li>Actively participate in design reviews with dcbel Design Engineering to ensure manufacturability and develop effective DFM (Design for Manufacturability) strategies in collaboration with suppliers. </li></ul> Key requirements<ul><li>Bachelor’s degree in Electrical, Mechanical, Industrial, or Engineering, or equivalent relevant experience and proven ability. </li><li>5+ years experience working with electromechanical products; quality management experience is an asset. </li><li>Familiarity with SPC (Statistical Process Control) and data analysis. </li><li>Willingness to travel 30–40%, sometimes on short notice. .</li></ul> Bonus skills <ul><li>Bilingual English and French.</li></ul> Profile<ul><li>Strong project management skills with the ability to structure and execute initiatives. </li><li>Thrive in a fast-paced, high-growth environment; excellent collaboration and teamwork skills. </li><li>Strong technical writing skills; ability to communicate complex issues clearly and concisely. </li></ul> What's in it for you<ul><li>Be part of a company that is backed by numerous globally respected investors and has world-changing patents in an industry changing for the first time in history.</li><li>Grow your professional experience amongst blue chip partners and a close-knit team of committed and experienced energy experts who deeply care about the work they do.</li><li>Full benefits package including Health insurance, Health virtual care, employee stock options plan (ESOP) and flexible hours. Parking available or with our employer commute program a short walking distance from Metro Namur.</li></ul></div></div>

<div class="org-about-module__description">
<div id="ember379" class="ember-view organization-about-module__content-consistant-cards-description">dcbel develops technology and designs products that put people at the center of the modern energy ecosystem. The company was founded in 2015 on the principle that everyone deserves clean, reliable and sustainable energy to live a life without compromise. dcbel Home Energy Station perfects the art and science of smart home energy, allowing people to take ownership over their energy supply with one small device. Homeowners can supply their home and EV with solar power, use vehicle-to-home charging to make power outages a thing of the past, and reduce energy costs with artificial intelligence.</div>
</div>
<div class="org-about-module__content-improvement">
<div class="org-about-module__content-box">&nbsp;</div>
</div>

Manufacturing Engineer

<div><div>dcbel Inc. (www.dcbel.energy) is a growing company developing technology and designing products that will make clean, efficient, and sustainable energy accessible to all — because everyone in the world deserves energy without compromise. dcbel at the leading edge of the residential energy revolution, enabling decentralized energy consumption and production through its vertically integrated suite of energy hardware and software products, and their supporting infrastructure. Our flagship product, the dcbel Home Energy Station, is a small wall mounted device that gives everyone ownership over their energy supply by using solar power to charge their EV and home, unlocking their EV’s battery for backup power (V2H), and optimizing the energy flow between their solar panels, EVs, backup battery and the grid. The opportunitydcbel is looking to hire a Manufacturing Engineer that will be responsible for the industrialization, optimization, and continuous improvement of products and manufacturing processes. The ideal candidate is a hands-on individual contributor with at least 5 years of manufacturing experience, who thrives in a dynamic environment and is willing to get directly involved to drive results. Main responsibilities<ul><li>Lead New Product Introduction (NPI) ramp-up and training at contract manufacturer sites. Maintain issue logs and track issues to resolution. </li><li>Populate ERP, MRP, and PLM systems with accurate production data. </li><li>Own part quality, process optimization, and supplier industrialization throughout the product lifecycle. </li><li>Monitor production throughput and quality metrics; recommend and implement corrective actions as needed. </li><li>Develop, map, and optimize manufacturing process flows, takt times. </li><li>Collaborate with suppliers to ensure alignment with dcbel’s quality and manufacturing standards. </li><li>Develop and maintain comprehensive documentation, including work instructions and standard operating procedures. </li><li>Ensure robust error-proofing (poka-yoke) is built into manufacturing processes. </li><li>Lead and close NCRs (Non-Conformance Reports) and SCARs (Supplier Corrective Action Requests) efficiently, preventing recurring issues. </li><li>Drive continuous improvement initiatives targeting cost reduction, waste elimination, lead-time improvements, and quality enhancement. </li><li>Actively participate in design reviews with dcbel Design Engineering to ensure manufacturability and develop effective DFM (Design for Manufacturability) strategies in collaboration with suppliers. </li></ul> Key requirements<ul><li>Bachelor’s degree in Electrical, Mechanical, Industrial, or Engineering, or equivalent relevant experience and proven ability. </li><li>5+ years experience working with electromechanical products; quality management experience is an asset. </li><li>Familiarity with SPC (Statistical Process Control) and data analysis. </li><li>Willingness to travel 30–40%, sometimes on short notice. .</li></ul> Bonus skills <ul><li>Bilingual English and French.</li></ul> Profile<ul><li>Strong project management skills with the ability to structure and execute initiatives. </li><li>Thrive in a fast-paced, high-growth environment; excellent collaboration and teamwork skills. </li><li>Strong technical writing skills; ability to communicate complex issues clearly and concisely. </li></ul> What's in it for you<ul><li>Be part of a company that is backed by numerous globally respected investors and has world-changing patents in an industry changing for the first time in history.</li><li>Grow your professional experience amongst blue chip partners and a close-knit team of committed and experienced energy experts who deeply care about the work they do.</li><li>Full benefits package including Health insurance, Health virtual care, employee stock options plan (ESOP) and flexible hours. Parking available or with our employer commute program a short walking distance from Metro Namur.</li></ul></div></div>

Manufacturing Engineer

About the Job

About the Company

dcbel

Similar Jobs