<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>What You’ll Do:<ul><li>Assist with the design of EPS (Electric Propulsion System - Electric Motor &amp; Propeller)  production system, including line layout, manufacturing processes and automation, installation, and overall battery production ramp planning for a new manufacturing facility</li><li>Apply expert level knowledge of Electric Motors and manufacturing process to collaborate and influence our multidisciplinary Product Design Engineering, Quality, Manufacturing and Facilities teams in the development of a new EPS for an eVTOL aircraft</li><li>Drive the Design for Manufacturability efforts with the product design team</li><li>Determine the requirements for automation, tools, stands, fixtures, etc.</li><li>Develop the manufacturing Build Plan (line layout, manufacturing methods, part flow, tools, equipment, precedence network, etc.) and determine an appropriate MBOM</li><li>Conduct process failure mode and analysis (PFMEA) for the EPS production system</li><li>Develop specification for tooling and automation equipment</li><li>Develop efficient manufacturing processes</li><li>Oversee Final Acceptance Testing of manufacturing equipment</li><li>Create/approve work instructions for Battery assembly and installation</li><li>Support first unit builds and testing of the production system</li><li>Develop and improve equipment validation procedures including calibration and qualification</li></ul>What You Need:<ul><li>Bachelor’s degree in Electrical Engineering, Manufacturing Engineering, Mechanical Engineering, or equivalent</li><li>3-6 years work experience, EV or aerospace preferred</li><li>Excellent communication and interpersonal skills</li><li>Effective organizational and time management skills</li><li>Efficient documentation and written communication</li><li>Self-motivated with the ability to work independently or as part of a team</li><li>Ability to work in a fast paced and highly regulated environment with adaptability to changing priorities</li><li>Direct hands on build experience with mechanical and electronic assemblies using sophisticated manufacturing equipment</li><li>Demonstrated experience in statistical process control and GD&amp;T</li><li>Experience developing production lines from prototype to mass production</li><li>Experience commissioning and improving Equipment.  Have a demonstrated track record of Overall Equipment Effectiveness (OEE) improvement, Preventative and Predictive Maintenance activities, preferred</li><li>Strong organizational skills</li><li>Experience with CAD, PLM, MES, and ERP software</li><li>Strong problem-solving skills and an aptitude for learning systems quickly.  Able to utilize structured problem-solving techniques such as Lean, six sigma, DMAIC, Ishikawa, Five Why (5W) or Eight Disciplines (8D).  Able to resolve high level performance issues into addressable actions, preferred</li></ul>Bonus Qualifications:<ul><li>Hands-on experience with EV DU (Drive Unit) manufacturing</li><li>Experience with any one or more of the rotor assembly, stator assembly and gearbox assembly processes in an EV DU.</li><li>Experience programming/troubleshooting industrial automation (PLC, robots, gantries, etc…)</li><li>Ability to travel 10% of the time</li><li>EV/eVTOL knowledge or experience</li><li>Experience with high voltage wiring, batteries, and electric motor</li><li>Aircraft configuration management and conformity experience</li><li>NX and AutoCAD experience</li></ul>Please note that this job description is intended to provide a general overview of the position and does not include an exhaustive list of responsibilities and qualifications.At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $163,200 - $200,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.<div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to <a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Archer is designing and developing electric vertical takeoff and landing aircraft for use in urban air mobility networks. Archer&rsquo;s mission is to unlock the skies, freeing everyone to reimagine how they move and spend time. Archer's team is based in Santa Clara, CA. To learn more, visit www.archer.com.

Staff Motor Manufacturing Engineer

<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>What You’ll Do:<ul><li>Assist with the design of EPS (Electric Propulsion System - Electric Motor &amp; Propeller)&nbsp; production system, including line layout, manufacturing processes and automation, installation, and overall battery production ramp planning for a new manufacturing facility</li><li>Apply expert level knowledge of Electric Motors and manufacturing process to collaborate and influence our multidisciplinary Product Design Engineering, Quality, Manufacturing and Facilities teams in the development of a new EPS for an eVTOL aircraft</li><li>Drive the Design for Manufacturability efforts with the product design team</li><li>Determine the requirements for automation, tools, stands, fixtures, etc.</li><li>Develop the manufacturing Build Plan (line layout, manufacturing methods, part flow, tools, equipment, precedence network, etc.) and determine an appropriate MBOM</li><li>Conduct process failure mode and analysis (PFMEA) for the EPS production system</li><li>Develop specification for tooling and automation equipment</li><li>Develop efficient manufacturing processes</li><li>Oversee Final Acceptance Testing of manufacturing equipment</li><li>Create/approve work instructions for Battery assembly and installation</li><li>Support first unit builds and testing of the production system</li><li>Develop and improve equipment validation procedures including calibration and qualification</li></ul>What You Need:<ul><li>Bachelor’s degree in Electrical Engineering, Manufacturing Engineering, Mechanical Engineering, or equivalent</li><li>3-6 years work experience, EV or aerospace preferred</li><li>Excellent communication and interpersonal skills</li><li>Effective organizational and time management skills</li><li>Efficient documentation and written communication</li><li>Self-motivated with the ability to work independently or as part of a team</li><li>Ability to work in a fast paced and highly regulated environment with adaptability to changing priorities</li><li>Direct hands on build experience with mechanical and electronic assemblies using sophisticated manufacturing equipment</li><li>Demonstrated experience in statistical process control and GD&amp;T</li><li>Experience developing production lines from prototype to mass production</li><li>Experience commissioning and improving Equipment.&nbsp; Have a demonstrated track record of Overall Equipment Effectiveness (OEE) improvement, Preventative and Predictive Maintenance activities, preferred</li><li>Strong organizational skills</li><li>Experience with CAD, PLM, MES, and ERP software</li><li>Strong problem-solving skills and an aptitude for learning systems quickly.&nbsp; Able to utilize structured problem-solving techniques such as Lean, six sigma, DMAIC, Ishikawa, Five Why (5W) or Eight Disciplines (8D).&nbsp; Able to resolve high level performance issues into addressable actions, preferred</li></ul>Bonus Qualifications:<ul><li>Hands-on experience with EV DU (Drive Unit) manufacturing</li><li>Experience with any one or more of the rotor assembly, stator assembly and gearbox assembly processes in an EV DU.</li><li>Experience programming/troubleshooting industrial automation (PLC, robots, gantries, etc…)</li><li>Ability to travel 10% of the time</li><li>EV/eVTOL knowledge or experience</li><li>Experience with high voltage wiring, batteries, and electric motor</li><li>Aircraft configuration management and conformity experience</li><li>NX and AutoCAD experience</li></ul>Please note that this job description is intended to provide a general overview of the position and does not include an exhaustive list of responsibilities and qualifications.At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $163,200 - $200,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.<div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to&nbsp;<a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Staff Motor Manufacturing Engineer

About the Job

About the Company

Archer

Similar Jobs

Senior Motor Manufacturing Engineer

Senior Motor Manufacturing Engineer

Sr Industrial Engineer, Powertrain

Sr Industrial Engineer, Powertrain

Staff Process Engineer, General Assembly

Staff Process Engineer, General Assembly

Sr Engineer, Manufacturing

Sr Engineer, Manufacturing

Sr. Manufacturing Engineer, Powertrain Battery

Sr. Manufacturing Engineer, Powertrain Battery

Senior Manufacturing Engineer

Senior Manufacturing Engineer

Sr. Mechanical Engineer, Drive Unit Continuous Improvement

Sr. Mechanical Engineer, Drive Unit Continuous Improvement

Senior Mechanical Engineer, Production

Senior Mechanical Engineer, Production

Senior Mechanical Design Engineer: Electric Motor

Senior Mechanical Design Engineer: Electric Motor

Thrust Unit Sustaining Engineer Lead

Thrust Unit Sustaining Engineer Lead