Location:Madrid, SpainJob ID: R0115463Date Posted:2026-01-12Company Name:HITACHI ENERGY SPAIN, S.A.U.Profession (Job Category):Engineering &amp; ScienceJob Schedule: Full timeRemote:NoJob Description:The opportunitySingle Point of Contact within HV Products for manufacturing philosophy and execution pertaining to Control and Protection Electrical Cabinets for Power System Substations. Responsible to provide manufacturing methods to optimise resource use, minimise waste and maintain Quality standards.Scope of Products include but are not limited to: GIS, PASS, DTB, LTB, GCB, MECB, BESS.How you'll make an impact:<ul><li>Strong collaboration with the HV Control &amp; Protection System Expert, ECAD Solution Owner, local Industrial Engineering Teams, Internal and External Local Control Cubicles (LCC) Vendors.</li><li>Sharing manufacturing knowledge with Secondary Design Engineers so that they are more effective in defining the LCCs to be manufactured/assembled.</li><li>Analyse International Specification/User requirements for Manufacturing requirements for Local Control Cubicles (LCCS).</li><li>Product-wise (GIS, PASS, DTB, LTB, GCB, MECB, BESS etc)</li><li>National standard-wise à UL (ANSI), CSA and IEC. Potential use of IEC components for American-UL market</li><li>Identify gaps, propose methods to close these gaps</li><li>Ensure conformity with full documentation (type tests if needed)</li><li>Review customer specifications across HV for preparing a standardised Secondary LCC Manufacturing Solution.</li><li>Propose harmonisation steps for different standards between different units</li><li>Support proposal of new component suppliers to existing Clients’ approved material lists</li><li>Apply Lean Methods and review/implement best practices with LCC vendors</li><li>Thorough knowledge in interpreting electrical engineering schematics and how to relate them to the manufacture of LCCs.</li><li>Mechanical knowledge with regards LCC Enclosure design and fabrication including but not limited to: ingress protection (IP and NEMA ratings), mechanical impact protection (IK code), corrosion protection classes, for enclosures.</li><li>Provide guidelines to ensure the effective use of tools, plant and equipment in the manufacture/assembly of LCCs.</li><li>Liaise with LCC Vendors as to input requirements needed by them to produce LCCs more efficiently, safely and to Hitachi Energy’s minimum Quality expectations.</li><li>Drive Continuous Improvement ideas within field</li><li>Define minimum requirements and best practices in LCC Manufacturing and Testing Processes and safety aspects.</li><li>Collaborate with BU’s of GA, GI, TR and Service</li><li>Look for synergies, reduce variation of components within HV</li><li>Provide input steering for R&amp;D projects within the domain of Control &amp; Protection LCC Manufacture/Assembly.</li><li>Challenge existing philosophy and align with best practices</li><li>Support SCM when new LCC supplier to be reviewed for future on-boarding and in PPAP process</li><li>Interact with stakeholders: Sales, SCM, Quality, Engineers, LCC Panel Builders and their sub suppliers, Component Vendors</li><li>Single point of contact for Secondary Engineering community and LCC Vendors with manufacturing-related topics</li><li>Strong collaboration with ECAD Solution Owner, Control &amp; Protection System Expert, LCC Vendors</li><li>Subject Matter Expert to guide Secondary Engineers within HV with regards the manufacture/assembly of LCCs.</li><li>Lead specific development/continuous improvement projects within the field of Control &amp; Protection LCC manufacture/assembly</li><li>Responsible to provide manufacturing methods to optimise resource use, minimise waste and maintain Quality standards.</li></ul>Your background:<ul><li>Comprehensive knowledge of manufacture of Local Control Cabinets in the field of Control &amp; Protection in the domain of High Voltage Products (GIS, DTB, LTB. PASS, GCB, BESS).</li><li>Thorough knowledge of implementing Protection and control schemes in substations and utilities from technical documentation including but not limited to Panel design and building, lean methods, continuous improvement.</li><li>Knowledge of E3 as an ECAD tool advantageous.</li><li>Academic degree in Electrical/Mechanical Engineering or similar</li><li>&gt; 10 years in similar field.</li><li>Fluency in English.</li></ul>More about us:We offer you the opportunity to work with fantastic people and develop yourself on projects that present great technical challenges and have a real impact. <h2>Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a <a href="https://www.hitachienergy.com/contact-us/general-inquiry?type=I+have+a+General+question">general inquiry form</a> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.</h2><h2>This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response. </h2>

Hitachi Energy is a global technology leader that is advancing a sustainable energy future for all. We serve customers in the utility, industry and infrastructure sectors with innovative solutions and services across the value chain. Together with customers and partners, we pioneer technologies and enable the digital transformation required to accelerate the energy transition towards a carbon-neutral future. We are advancing the world&rsquo;s energy system to become more sustainable, flexible and secure whilst balancing social, environmental and economic value. Hitachi Energy has a proven track record and unparalleled installed base in more than 140 countries.

HV Control & Protection Manufacturing Expert

Location:Madrid, SpainJob ID: R0115463Date Posted:2026-01-12Company Name:HITACHI ENERGY SPAIN, S.A.U.Profession (Job Category):Engineering &amp; ScienceJob Schedule: Full timeRemote:NoJob Description:The opportunitySingle Point of Contact within HV Products for manufacturing philosophy and execution pertaining to Control and Protection Electrical Cabinets for Power System Substations. Responsible to provide manufacturing methods to optimise resource use, minimise waste and maintain Quality standards.Scope of Products include but are not limited to: GIS, PASS, DTB, LTB, GCB, MECB, BESS.How you'll make an impact:<ul><li>Strong collaboration with the HV Control &amp; Protection System Expert, ECAD Solution Owner, local Industrial Engineering Teams, Internal and External Local Control Cubicles (LCC) Vendors.</li><li>Sharing manufacturing knowledge with Secondary Design Engineers so that they are more effective in defining the LCCs to be manufactured/assembled.</li><li>Analyse International Specification/User requirements for Manufacturing requirements for Local Control Cubicles (LCCS).</li><li>Product-wise (GIS, PASS, DTB, LTB, GCB, MECB, BESS etc)</li><li>National standard-wise à UL (ANSI), CSA and IEC. Potential use of IEC components for American-UL market</li><li>Identify gaps, propose methods to close these gaps</li><li>Ensure conformity with full documentation (type tests if needed)</li><li>Review customer specifications across HV for preparing a standardised Secondary LCC Manufacturing Solution.</li><li>Propose harmonisation steps for different standards between different units</li><li>Support proposal of new component suppliers to existing Clients’ approved material lists</li><li>Apply Lean Methods and review/implement best practices with LCC vendors</li><li>Thorough knowledge in interpreting electrical engineering schematics and how to relate them to the manufacture of LCCs.</li><li>Mechanical knowledge with regards LCC Enclosure design and fabrication including but not limited to: ingress protection (IP and NEMA ratings), mechanical impact protection (IK code), corrosion protection classes, for enclosures.</li><li>Provide guidelines to ensure the effective use of tools, plant and equipment in the manufacture/assembly of LCCs.</li><li>Liaise with LCC Vendors as to input requirements needed by them to produce LCCs more efficiently, safely and to Hitachi Energy’s minimum Quality expectations.</li><li>Drive Continuous Improvement ideas within field</li><li>Define minimum requirements and best practices in LCC Manufacturing and Testing Processes and safety aspects.</li><li>Collaborate with BU’s of GA, GI, TR and Service</li><li>Look for synergies, reduce variation of components within HV</li><li>Provide input steering for R&amp;D projects within the domain of Control &amp; Protection LCC Manufacture/Assembly.</li><li>Challenge existing philosophy and align with best practices</li><li>Support SCM when new LCC supplier to be reviewed for future on-boarding and in PPAP process</li><li>Interact with stakeholders: Sales, SCM, Quality, Engineers, LCC Panel Builders and their sub suppliers, Component Vendors</li><li>Single point of contact for Secondary Engineering community and LCC Vendors with manufacturing-related topics</li><li>Strong collaboration with ECAD Solution Owner, Control &amp; Protection System Expert, LCC Vendors</li><li>Subject Matter Expert to guide Secondary Engineers within HV with regards the manufacture/assembly of LCCs.</li><li>Lead specific development/continuous improvement projects within the field of Control &amp; Protection LCC manufacture/assembly</li><li>Responsible to provide manufacturing methods to optimise resource use, minimise waste and maintain Quality standards.</li></ul>Your background:<ul><li>Comprehensive knowledge of manufacture of Local Control Cabinets in the field of Control &amp; Protection in the domain of High Voltage Products (GIS, DTB, LTB. PASS, GCB, BESS).</li><li>Thorough knowledge of implementing Protection and control schemes in substations and utilities from technical documentation including but not limited to Panel design and building, lean methods, continuous improvement.</li><li>Knowledge of E3 as an ECAD tool advantageous.</li><li>Academic degree in Electrical/Mechanical Engineering or similar</li><li>&gt; 10 years in similar field.</li><li>Fluency in English.</li></ul>More about us:We offer you the opportunity to work with fantastic people and develop yourself on projects that present great technical challenges and have a real impact. <h2>Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a <a href="https://www.hitachienergy.com/contact-us/general-inquiry?type=I+have+a+General+question">general inquiry form</a> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.</h2><h2>This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response. </h2>

HV Control & Protection Manufacturing Expert

About the Job

About the Company

HITACHI ENERGY

Similar Jobs

Project Plant Lead Engineer HVDC (f/m/d)

Project Plant Lead Engineer HVDC (f/m/d)

Senior Project Engineer - Auxiliary Power Systems and Equipment

Senior Project Engineer - Auxiliary Power Systems and Equipment

Protection & Controls Engineer II / III

Protection & Controls Engineer II / III

Control & Protection Engineer - HVDC

Control & Protection Engineer - HVDC

C&P HVDC Hardware Design Engineer

C&P HVDC Hardware Design Engineer

Hardware Electrical Design Engineer – HVDC Control & Protection Systems

Hardware Electrical Design Engineer – HVDC Control & Protection Systems

HVDC Control & Protection Electrical Design Engineer

HVDC Control & Protection Electrical Design Engineer

HV Primary Plant Engineer

HV Primary Plant Engineer

HV Secondary Plant engineer

HV Secondary Plant engineer

Hardware Electrical Design Engineer – HVDC Control & Protection Systems

Hardware Electrical Design Engineer – HVDC Control & Protection Systems