The Program Manager is responsible for organizing, coordinating, and executing a comprehensive program management regimen that meets customer expectations. The individual provides program management for customer programs smaller in scope in terms of the number of customers, facilities, programs, or strategic importance. Potentially involved in winning the business/quotation preparation focusing on (1) the assertive oversight of product launches, (2) vigilant cost containment, avoidance, and reduction throughout a product’s life cycle, and (3) a comprehensive communications effort. Working at all levels of the organization the incumbent must build a case for the program and gain the commitment of the department heads allowing the allocation of the necessary resources. The leadership activities would include but not be limited to strategic programs within the team environment involving planning and defining objectives, product design and development, process design and development, product and process validation, and initial production performance.Key Roles &amp; ResponsibilitiesTo perform this job successfully, an individual must have the ability to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Standard Duites :  <ul><li>Lead customer required APQP activity</li><li>Lead internal team through new program launches</li><li>Lead internal team through current program uplifts</li><li>Facilitate and lead customer meetings</li><li>Support PTC SEG/PDT meetings</li><li>Lead PRA actions with entire launch team</li><li>Lead all customer process changes and gain approval (SREAs, FRs)</li><li>Challenge whole supply base to properly validate change requests to align with OEM expectations.</li><li>Perform capacity analysis (Ford CAR, Toyota Loading Capacity)</li><li>Schedule all pre-SOP builds with production team.</li><li>Manage trial/prototype builds assuring that resources are available (people, material, machines, etc.)</li><li>Attend all program management and EOT meetings providing input when necessary</li><li>Write all supplier tooling kickoff requisitions and pre-production PPAP part requests</li><li>Drive accountability through regular follow up including PRA / APQP meetings</li><li>Lead SLT weekly and monthly status update meetings</li><li>Produce and maintain master Gantt charts</li><li>Maintain and track program financials to AR</li><li>Interface with the customer and facilitate customer visits to the plant</li><li>Lead or participate on cost reduction teams</li><li>Support update activities of APQP documentation on customers’ systems</li><li>Facilitate Seneca change management meeting as required.</li><li>Lead or participate in Program Gate Reviews.</li><li>Lead or participate in PKO (Program Kick-Off) meetings</li><li>Lead or participate in Lessons Learned reviews</li><li>Write Purchase Requisitions as required for trial build parts, supplier tooling, etc.</li><li>Serves as program owner, accountable for the execution and success of the</li></ul>program.<ul><li>Develops and validates program scope and customer deliverables and ensures that customer expectations for quality, timing, and product performance are met.</li><li>Identifies and manages assigned resources (purchased material, engineering development, capital investment, launch costs, contract provisions) to minimize total program costs and maximize expected return.</li><li>Meets program deliverables (financial targets of appropriation request, cost, timing, completeness) as defined by the Executive Oversight Team (“EOT”).</li><li>Leads efforts to ensure that BW expectations of ROI and EV are met.</li><li>Assists the EOT in developing a program strategy and converts the strategy into action.</li><li>Alerts the EOT of program risks that are beyond the scope of the program team in an appropriate timeframe; continuously identifies risk factors and seeks to mitigate adverse impact.</li><li>Works with functional managers to assign members of cross-functional SEG product launch teams. This includes but is not limited to manufacturing management, production operators, maintenance, materials, finance, quality, safety and HR.</li><li>Leads and manages team environment through all program phases / gate points with emphasis on synergy, development and empowerment to ensure collaboration, team unity and team success.</li><li>Conducts frequent Team meetings. Leads team meetings, monthly functional meetings, joint BW/customer meetings and EOT review meetings.</li><li>Maintain program charter, timing plan and gate review matrices.</li><li>Helps the team reach consensus when necessary and makes decisions as required.</li><li>Knows when to make decision independently and when to ask for guidance and input.</li><li>Evaluates and reviews team member performance and provides input to TMS.</li><li>Addresses and resolves program "roadblocks” through the appropriate functional managers, or functional directors, or vice presidents.</li><li>Keeps program team in place for 3 to 6 months after launch to ensure objectives of delivery, quality and cost are met. Objectively evaluates performance with input from the EOT to determine at the 3 month after launch window if extension is required.</li><li>Serves as contact person to the customer and participates in, or leads in some cases, customer meetings; a key contact for the customer APQP program.</li><li>Develops relationship with customer that makes the product launch an experience that contributes to awarding new business in the future.</li><li>Ensures internal and external documentation requirements are met.</li></ul>Additional Information: <ul><li>Travel is occasionally required, up to 5% of the time.</li></ul>Safety and Physical Requirements:<ul><li>All employees are responsible for knowing, understanding and complying with the safety policies and procedures.</li><li>Wear PPE when appropriate in designated campus areas.</li><li>Lifting shoulder high up to 35 lbs. on occasion.</li></ul>Key CompetenciesSafety Initiative Judgement/Decision Making Teamwork/Interpersonal Skills Process Management  Education &amp; Experience<ul><li>Bachelor’s degree in business, engineering, or related discipline required</li><li>5+ years’ experience in business, engineering, or manufacturing (automotive driveline or powertrain preferred)</li><li>Product and process launch experience strongly preferred</li><li>Demonstrated team leadership experience and training</li><li>Effective, professional verbal and written communication skills to interface with all levels BorgWarner, external customers, and suppliers</li><li>Languages: English and customer specific language depending upon Program assignment(s)</li><li>Proficient in computer skills for industry standard word processing, spreadsheet, intranet, and PLM software</li><li>Travel requirements depend upon Program assignment(s</li></ul>EEO Statement “BorgWarner is an equal employment opportunity employer such that all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity/expression, national origin, disability or protected veteran status.”Salary Range:$107,600 - $147,950Internal Use Only: SalaryGlobal Terms of Use and Privacy Statement Carefully read the BorgWarner Privacy Policy before using this website. Your  ability to access and use this website and apply for a job at BorgWarner are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking <a href="https://www.borgwarner.com/legal/privacy-policy-for-online-applications">here</a><a href="http://multimedia.3m.com/mws/media/1274940O/3m-jobs-country-data-privacy-statements-external.pdf">,</a> select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.Career Scam Disclaimer:  BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website.  To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner.  Applicants should never provide their national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online.  Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities.

As a global product leader for over 130 years, we deliver innovative and sustainable mobility solutions. Guided by our commitment to inclusion, integrity, excellence, responsibility and collaboration&mdash;and our pledge to reach carbon neutrality by 2035&mdash;we&rsquo;re leading the automotive industry to a future that is cleaner, healthier and safer for all.
Start your future with BorgWarner now! We are looking for dedicated, talented people to fill our manufacturing and technical facilities all over the world. For more information, please visit: https://bit.ly/WorkAtBorgWarner
For legal and data protection inquiries please visit: https://www.borgwarner.com/legal
Career Scam Disclaimer BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their Social Security numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner&rsquo;s website to verify the authenticity of any employment opportunities.

Program Manager

The Program Manager is responsible for organizing, coordinating, and executing a comprehensive program management regimen that meets customer expectations. The individual provides program management for customer programs smaller in scope in terms of the number of customers, facilities, programs, or strategic importance. Potentially involved in winning the business/quotation preparation focusing on (1) the assertive oversight of product launches, (2) vigilant cost containment, avoidance, and reduction throughout a product’s life cycle, and (3) a comprehensive communications effort. Working at all levels of the organization the incumbent must build a case for the program and gain the commitment of the department heads allowing the allocation of the necessary resources. The leadership activities would include but not be limited to strategic programs within the team environment involving planning and defining objectives, product design and development, process design and development, product and process validation, and initial production performance.Key Roles &amp; ResponsibilitiesTo perform this job successfully, an individual must have the ability to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Standard Duites :  <ul><li>Lead customer required APQP activity</li><li>Lead internal team through new program launches</li><li>Lead internal team through current program uplifts</li><li>Facilitate and lead customer meetings</li><li>Support PTC SEG/PDT meetings</li><li>Lead PRA actions with entire launch team</li><li>Lead all customer process changes and gain approval (SREAs, FRs)</li><li>Challenge whole supply base to properly validate change requests to align with OEM expectations.</li><li>Perform capacity analysis (Ford CAR, Toyota Loading Capacity)</li><li>Schedule all pre-SOP builds with production team.</li><li>Manage trial/prototype builds assuring that resources are available (people, material, machines, etc.)</li><li>Attend all program management and EOT meetings providing input when necessary</li><li>Write all supplier tooling kickoff requisitions and pre-production PPAP part requests</li><li>Drive accountability through regular follow up including PRA / APQP meetings</li><li>Lead SLT weekly and monthly status update meetings</li><li>Produce and maintain master Gantt charts</li><li>Maintain and track program financials to AR</li><li>Interface with the customer and facilitate customer visits to the plant</li><li>Lead or participate on cost reduction teams</li><li>Support update activities of APQP documentation on customers’ systems</li><li>Facilitate Seneca change management meeting as required.</li><li>Lead or participate in Program Gate Reviews.</li><li>Lead or participate in PKO (Program Kick-Off) meetings</li><li>Lead or participate in Lessons Learned reviews</li><li>Write Purchase Requisitions as required for trial build parts, supplier tooling, etc.</li><li>Serves as program owner, accountable for the execution and success of the</li></ul>program.<ul><li>Develops and validates program scope and customer deliverables and ensures that customer expectations for quality, timing, and product performance are met.</li><li>Identifies and manages assigned resources (purchased material, engineering development, capital investment, launch costs, contract provisions) to minimize total program costs and maximize expected return.</li><li>Meets program deliverables (financial targets of appropriation request, cost, timing, completeness) as defined by the Executive Oversight Team (“EOT”).</li><li>Leads efforts to ensure that BW expectations of ROI and EV are met.</li><li>Assists the EOT in developing a program strategy and converts the strategy into action.</li><li>Alerts the EOT of program risks that are beyond the scope of the program team in an appropriate timeframe; continuously identifies risk factors and seeks to mitigate adverse impact.</li><li>Works with functional managers to assign members of cross-functional SEG product launch teams. This includes but is not limited to manufacturing management, production operators, maintenance, materials, finance, quality, safety and HR.</li><li>Leads and manages team environment through all program phases / gate points with emphasis on synergy, development and empowerment to ensure collaboration, team unity and team success.</li><li>Conducts frequent Team meetings. Leads team meetings, monthly functional meetings, joint BW/customer meetings and EOT review meetings.</li><li>Maintain program charter, timing plan and gate review matrices.</li><li>Helps the team reach consensus when necessary and makes decisions as required.</li><li>Knows when to make decision independently and when to ask for guidance and input.</li><li>Evaluates and reviews team member performance and provides input to TMS.</li><li>Addresses and resolves program "roadblocks” through the appropriate functional managers, or functional directors, or vice presidents.</li><li>Keeps program team in place for 3 to 6 months after launch to ensure objectives of delivery, quality and cost are met. Objectively evaluates performance with input from the EOT to determine at the 3 month after launch window if extension is required.</li><li>Serves as contact person to the customer and participates in, or leads in some cases, customer meetings; a key contact for the customer APQP program.</li><li>Develops relationship with customer that makes the product launch an experience that contributes to awarding new business in the future.</li><li>Ensures internal and external documentation requirements are met.</li></ul>Additional Information: <ul><li>Travel is occasionally required, up to 5% of the time.</li></ul>Safety and Physical Requirements:<ul><li>All employees are responsible for knowing, understanding and complying with the safety policies and procedures.</li><li>Wear PPE when appropriate in designated campus areas.</li><li>Lifting shoulder high up to 35 lbs. on occasion.</li></ul>Key CompetenciesSafety Initiative Judgement/Decision Making Teamwork/Interpersonal Skills Process Management  Education &amp; Experience<ul><li>Bachelor’s degree in business, engineering, or related discipline required</li><li>5+ years’ experience in business, engineering, or manufacturing (automotive driveline or powertrain preferred)</li><li>Product and process launch experience strongly preferred</li><li>Demonstrated team leadership experience and training</li><li>Effective, professional verbal and written communication skills to interface with all levels BorgWarner, external customers, and suppliers</li><li>Languages: English and customer specific language depending upon Program assignment(s)</li><li>Proficient in computer skills for industry standard word processing, spreadsheet, intranet, and PLM software</li><li>Travel requirements depend upon Program assignment(s</li></ul>EEO Statement “BorgWarner is an equal employment opportunity employer such that all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity/expression, national origin, disability or protected veteran status.”Salary Range:$107,600 - $147,950Internal Use Only: SalaryGlobal Terms of Use and Privacy Statement Carefully read the BorgWarner Privacy Policy before using this website. Your  ability to access and use this website and apply for a job at BorgWarner are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking <a href="https://www.borgwarner.com/legal/privacy-policy-for-online-applications">here</a><a href="http://multimedia.3m.com/mws/media/1274940O/3m-jobs-country-data-privacy-statements-external.pdf">,</a> select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.Career Scam Disclaimer:  BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website.  To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner.  Applicants should never provide their national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online.  Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities.

Program Manager

About the Job

About the Company

BorgWarner

Similar Jobs

Program Manager

Program Manager

Technical Program Manager

Technical Program Manager

Program Manager

Program Manager

Program Manager

Program Manager

Program Manager

Program Manager

Sr. Program Manager

Sr. Program Manager

Program Manager

Program Manager

Program Manager, Aircraft Integration

Program Manager, Aircraft Integration

Program Manager

Program Manager

Senior Sales Engineer

Senior Sales Engineer