<div>About Range EnergyRange Energy builds powered trailers that help electrify heavy-duty trucking without requiring fleets to replace their tractors. We solve real-world problems with real hardware. We move fast, take ownership, and hold a high bar for execution. We value people who are low ego and team-first, calm under pressure, direct and respectful communicators, willing to roll up their sleeves, and focused on solutions, not drama. We operate with high integrity. We do what we say we’ll do, we’re transparent about risks and tradeoffs, and we build trust through consistent follow-through. The work is hands-on. Sometimes messy. Often fast. Always meaningful. Founded in 2021, Range is led by experienced EV operators from Tesla, Zoox, Honda, and other leading OEMs. We are backed by strong investors and focused on building hardware that fleets will actually use. If you like building real things, solving hard problems, and working with low drama, high output teammates, you will fit here.Role SummaryWe're looking for a Mechanical Engineer with high drive, low ego, and a genuine desire to own hard problems across our trailer platform. This role sits at the center of our hardware development process — you'll be hands-on with CAE, executing FEA models and validating designs through simulation, while also contributing directly to the physical design and integration of trailer subsystems.The level is open. Whether you're early in your career and ready to build real skills fast, or an experienced engineer looking to take on significant technical ownership with minimal hand-holding, we want to talk. What matters is strong fundamentals, a bias toward execution, and genuine curiosity about how things work.You'll partner closely with systems, electrical, and manufacturing teams to ensure designs are robust, manufacturable, and ready for the road.</div> <h3>Key Responsibilities</h3><ul><div><ul style="margin-top:0px;margin-bottom:0px;padding-inline-start:48px;"><li style="font-size:11pt;font-family:Arial , sans-serif;">Develop and execute structural FEA models using CATIA &amp; Ansys to validate trailer subsystems — chassis, suspension, enclosures, and structural interfaces</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Build and maintain load cases, boundary conditions, and simulation workflows that support design decisions across the mechanical team</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Perform durability, fatigue, and thermal analyses to ensure designs meet real-world operating requirements</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Lead or contribute to mechanical design efforts — component design, tolerance analysis, and drawing release — commensurate with experience level</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Collaborate with hardware, systems, and manufacturing teams to integrate analysis into the design cycle and drive design-for-manufacturability</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Correlate simulation results with physical test data; own root-cause analysis when designs don't perform as expected</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Document analysis methods, assumptions, and results to support design reviews and build institutional knowledge</li></ul></div></ul><h3>What Success Looks Like (first 6–12 months)</h3><ul><div><ul style="margin-top:0px;margin-bottom:0px;padding-inline-start:48px;"><li style="font-size:11pt;font-family:Arial , sans-serif;">Own FEA validation for major subsystems — from load case development through design sign-off</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Build repeatable simulation workflows that improve speed and consistency across the mechanical team</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Become a trusted resource for analysis-driven design feedback across hardware and systems teams</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Ship a meaningful contribution to the organization’s physical design efforts — not just analysis support</li></ul></div></ul><h3>Required Qualifications</h3><ul><div><ul style="margin-top:0px;margin-bottom:0px;padding-inline-start:48px;"><li style="font-size:11pt;font-family:Arial , sans-serif;">Bachelor's or Master's in Mechanical Engineering, Automotive Engineering, or related field</li><li style="font-size:11pt;font-family:Arial , sans-serif;">2+ years of experience in mechanical design and/or structural analysis (internship and project team experience considered for strong candidates)</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Hands-on proficiency with FEA tools, preferably Ansys (Mechanical, Workbench)</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Experience with CAD tools (CATIA, NX, or SolidWorks)</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Solid understanding of structural mechanics, fatigue, and material behavior</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Ability to work independently, manage multiple tasks in parallel, and communicate findings clearly</li></ul></div></ul><h3>Preferred / Nice-to-Haves</h3><ul><div><ul style="margin-top:0px;margin-bottom:0px;padding-inline-start:48px;"><li style="font-size:11pt;font-family:Arial , sans-serif;">Experience in heavy vehicles, commercial trucks, trailers, or off-highway equipment</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Exposure to durability and fatigue analysis methods (stress-life, strain-life, damage accumulation)</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Familiarity with thermal analysis or CFD</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Experience correlating simulation results with physical test data</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Knowledge of ISO, SAE, or FMVSS standards for commercial vehicles</li><li style="font-size:11pt;font-family:Arial , sans-serif;">Background in mentoring peers or leading technical efforts on a team</li></ul></div></ul> <div>Range Energy’s compensation package includes a competitive salary, equity for all full-time roles, and a generous benefits package. The salary range for Mountain View, CA based applicants is between $106,000 - $260,000 annually. The total compensation will be determined based on multiple factors including domain knowledge, experience and location.---Range Energy participates in E-Verify in the United States. Range Energy will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization.</div>

40%+ fuel savings, up to 70% reduction in emissions, and 300 miles of full-assist range.Just hitch up and go. The Range trailer system is compatible with any and all tow vehicles, using standard interfaces.Range trailers can double the range of ZEV tractors, and provide fuel-saving benefits even when plug-in charging is limited.

Mechanical Engineer II / Staff

<div>About Range EnergyRange Energy builds powered trailers that help electrify heavy-duty trucking without requiring fleets to replace their tractors. We solve real-world problems with real hardware. We move fast, take ownership, and hold a high bar for execution. We value people who are low ego and team-first, calm under pressure, direct and respectful communicators, willing to roll up their sleeves, and focused on solutions, not drama. We operate with high integrity. We do what we say we’ll do, we’re transparent about risks and tradeoffs, and we build trust through consistent follow-through. The work is hands-on. Sometimes messy. Often fast. Always meaningful. Founded in 2021, Range is led by experienced EV operators from Tesla, Zoox, Honda, and other leading OEMs. We are backed by strong investors and focused on building hardware that fleets will actually use. If you like building real things, solving hard problems, and working with low drama, high output teammates, you will fit here.Role SummaryWe're looking for a Mechanical Engineer with high drive, low ego, and a genuine desire to own hard problems across our trailer platform. This role sits at the center of our hardware development process — you'll be hands-on with CAE, executing FEA models and validating designs through simulation, while also contributing directly to the physical design and integration of trailer subsystems.The level is open. Whether you're early in your career and ready to build real skills fast, or an experienced engineer looking to take on significant technical ownership with minimal hand-holding, we want to talk. What matters is strong fundamentals, a bias toward execution, and genuine curiosity about how things work.You'll partner closely with systems, electrical, and manufacturing teams to ensure designs are robust, manufacturable, and ready for the road.</div> <h3>Key Responsibilities</h3><ul><div><ul><li>Develop and execute structural FEA models using CATIA &amp; Ansys to validate trailer subsystems — chassis, suspension, enclosures, and structural interfaces</li><li>Build and maintain load cases, boundary conditions, and simulation workflows that support design decisions across the mechanical team</li><li>Perform durability, fatigue, and thermal analyses to ensure designs meet real-world operating requirements</li><li>Lead or contribute to mechanical design efforts — component design, tolerance analysis, and drawing release — commensurate with experience level</li><li>Collaborate with hardware, systems, and manufacturing teams to integrate analysis into the design cycle and drive design-for-manufacturability</li><li>Correlate simulation results with physical test data; own root-cause analysis when designs don't perform as expected</li><li>Document analysis methods, assumptions, and results to support design reviews and build institutional knowledge</li></ul></div></ul><h3>What Success Looks Like (first 6–12 months)</h3><ul><div><ul><li>Own FEA validation for major subsystems — from load case development through design sign-off</li><li>Build repeatable simulation workflows that improve speed and consistency across the mechanical team</li><li>Become a trusted resource for analysis-driven design feedback across hardware and systems teams</li><li>Ship a meaningful contribution to the organization’s physical design efforts — not just analysis support</li></ul></div></ul><h3>Required Qualifications</h3><ul><div><ul><li>Bachelor's or Master's in Mechanical Engineering, Automotive Engineering, or related field</li><li>2+ years of experience in mechanical design and/or structural analysis (internship and project team experience considered for strong candidates)</li><li>Hands-on proficiency with FEA tools, preferably Ansys (Mechanical, Workbench)</li><li>Experience with CAD tools (CATIA, NX, or SolidWorks)</li><li>Solid understanding of structural mechanics, fatigue, and material behavior</li><li>Ability to work independently, manage multiple tasks in parallel, and communicate findings clearly</li></ul></div></ul><h3>Preferred / Nice-to-Haves</h3><ul><div><ul><li>Experience in heavy vehicles, commercial trucks, trailers, or off-highway equipment</li><li>Exposure to durability and fatigue analysis methods (stress-life, strain-life, damage accumulation)</li><li>Familiarity with thermal analysis or CFD</li><li>Experience correlating simulation results with physical test data</li><li>Knowledge of ISO, SAE, or FMVSS standards for commercial vehicles</li><li>Background in mentoring peers or leading technical efforts on a team</li></ul></div></ul> <div>Range Energy’s compensation package includes a competitive salary, equity for all full-time roles, and a generous benefits package. The salary range for Mountain View, CA based applicants is between $106,000 - $260,000 annually. The total compensation will be determined based on multiple factors including domain knowledge, experience and location.---Range Energy participates in E-Verify in the United States. Range Energy will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization.</div>

Mechanical Engineer II / Staff

About the Job

About the Company

Range Energy

Similar Jobs

Senior Mechanical Engineer

Senior Mechanical Engineer

Staff Prototype Mechanical Design Engineer

Staff Prototype Mechanical Design Engineer

Senior Mechanical Engineer

Senior Mechanical Engineer

Mechanical Engineer, Powertrain Integration

Mechanical Engineer, Powertrain Integration

Mechanical Engineer

Mechanical Engineer

Mechanical Design Engineer [Propulsion]

Mechanical Design Engineer [Propulsion]

Mechanical Engineer

Mechanical Engineer

Propulsion Unit Manufacturing Engineer

Propulsion Unit Manufacturing Engineer

Mechanical Engineer, System Electronics

Mechanical Engineer, System Electronics

Engineer, Mechanical

Engineer, Mechanical